I don't like to be a smurf

Asgard · Post by **Asgard** » Tue Oct 28, 2003 12:12 pm

I just started mapping, its more like messing around etc but anywayz, i started with help from friends, built my own room,hallway,sky all really simple. I made a door but i think i can still get through if i was 5 times bigger....

Where can i find a page that gives me the acctual size of a door or the size of a wall like in the sniperhouse on the hunt, when u duck u can just C over it and stuff.

Pls help :s

P.S.: I FINALLY GOT MY MOHRADIANT WORKING !!!
had to buy a new computer though...

smartaiguy · Post by **smartaiguy** » Tue Oct 28, 2003 1:13 pm

16 units = 1ft

Here are some common dimensions

Player 112 high x 32 wide
Crouching 64 high x 32 wide
Door: (common) 128 x 64 x 8 (height x width x depth)

8ft wall - 128 units
9ft wall - 144 units
10ft wall - 160 units

For others basically times the number of feet you think it should be by 16 and you get your units!

Asgard · Post by **Asgard** » Wed Oct 29, 2003 12:58 pm

thanks m8

smartaiguy · Post by **smartaiguy** » Wed Oct 29, 2003 1:16 pm

no problem, anytime you need help just ask!

Asgard · Post by **Asgard** » Wed Oct 29, 2003 2:45 pm

well try this 1, my door only rotates in 1 direction now

and yes i tried search but looking into 50 + pages...

-=[BAD]=-dodgerman[CL] · Wed Oct 29, 2003 3:06 pm

Doors.... Func_Rotatingdoor, then enter this.. key:alwaysaway Value:1
Now the bit the tuts don't say, if your door is at an angle of 90 or 270 then select either for the angle in the Entity, same if it is facing 180 or 360.. Remember to do the side texture of your door so it looks like a door. By this i mean, to many mappers make doors with one texture, thats ok, but the sides have the same texture sqeezed on it as well....

Asgard · Post by **Asgard** » Wed Oct 29, 2003 4:36 pm

i tried that already alwaysaway 1 does not work

btw applying multiple textures to 1 'wall' how do you do that !

Shortricci · Post by **Shortricci** » Wed Oct 29, 2003 6:48 pm

To select individual faces on 'one' brush is simple.

Do the following:

Hold Ctrl + Shift + Left mouse button (one click)

Do this on the face you want to select in whatever view you want, i prefer to do it in 3d view!

- Ricci

smartaiguy · Post by **smartaiguy** » Wed Oct 29, 2003 11:57 pm

alwaysalway never works for me

Asgard · Post by **Asgard** » Thu Oct 30, 2003 12:20 pm

i found it myself angle 90, and thx for the select 1 part thingy

bdbodger · Post by **bdbodger** » Thu Oct 30, 2003 1:00 pm

If done right alwaysaway does work but you need to set the angle right too . example o--> where o is the origin set angle 90 or 270 the angle you want the door to open to not the angles the door is already at ! .

^
l
o

set angle at 0 or 180 . and make sure alwaysaway is spelt right it is easy to leave out a s or an a .

alwaysalway never works for me

no it doesn't does it .

smartaiguy · Post by **smartaiguy** » Thu Oct 30, 2003 1:16 pm

yeah, changing the angles should help.

Guitarfan · Post by **Guitarfan** » Thu Oct 30, 2003 5:09 pm

isn't alwaysaway set to 1 automatically

smartaiguy · Post by **smartaiguy** » Thu Oct 30, 2003 9:55 pm

Guitarfan wrote:isn't alwaysaway set to 1 automatically

I don't know... but it nevers works for me without it though...

Guitarfan · Post by **Guitarfan** » Thu Oct 30, 2003 10:19 pm

I'm too lazy to try if it works if you don't use it so I don't know either