Page 1 of 1
Dimensions?
Posted: Fri Jan 31, 2003 1:10 am
by Andy
What are the dimenstions for the standard door that are used in MOHAA? I have a bunch of doors, but none of them look quite right...
Posted: Fri Jan 31, 2003 1:27 am
by Surgeon
I use :
128 height
64 width
4/8 depth
but different mappers use different sizes
Posted: Fri Jan 31, 2003 1:28 am
by Innkeeper
look here
viewtopic.php?t=954&highlight=door+size
I make wooden interior doors 3 units thick, that would be 2 1/4"
Posted: Fri Jan 31, 2003 2:27 am
by Slyk
Dimensions depend on each situation. Normal doors I vary between 112 and 120 units (7 and 7 1/2 feet) tall. Depends on textures too... the dark wood like ones I make smaller, the colored, 'richer' looking ones I tend to make taller. Width, in my opionion, should be 48-54 units. Double door sets depend again, you can go with two narrow, linked doors at say 32 each in a market type setting or two wider ones for apartments, offices, etc.
Just be true to the environment. Keep the scale and textures to the setting. Don't do eye candy with scale and textures....use good detail brushes to add depth and realism. Nothing like bad scaling and poor texturing ruin good maps.
Posted: Fri Jan 31, 2003 3:49 am
by mohaa_rox
I don't care much about the size. I just make a door that just roughly higher than the player/ai.