.Map :: MoHAA Mapping

it says this

^~^~^ Can't find models/static/piano.tik
Tiki:LoadFile Couldn't load models/static/piano.tik

like 100 times
then

Writing C:\PROGRA~1\EAGAME~1\Mohaa\main\maps\dm\DestroyedVillage2q.bsp
Writing C:\PROGRA~1\EAGAME~1\Mohaa\main\maps\dm\DestroyedVillage2q.vis
5 seconds elapsed

C:\PROGRA~1\EAGAME~1\Mohaa\main\maps\dm>"C:\PROGRA~1\MOHAAT~1\Q3map.exe" -vis -
gamedir C:\PROGRA~1\EAGAME~1\Mohaa\main C:\PROGRA~1\EAGAME~1\Mohaa\main\maps\dm\
DestroyedVillage2q.map
---- vis ----
----- FS_Startup -----
----------------------
0 files in pk3 files
reading C:\PROGRA~1\EAGAME~1\Mohaa\main\maps\dm\DestroyedVillage2q.bsp
vis_derived = 0
reading C:\PROGRA~1\EAGAME~1\Mohaa\main\maps\dm\DestroyedVillage2q.prt
1009 portalclusters
3311 numportals
3219 numfaces
visdatasize:129160
(13.00) seconds.
50% complete. 0 hours 18 minutes 13 seconds remaining.

it stays here for hours

the only thing i have in my map are stairs with hand rail (multiple 50 sided bars...about 30)....an organ piano (around 20 50 sided pipes).....5 lights....and that's about all.....also texture

wot's the problem

The vis compile normally does take a long time, unless you put it on "-fast". You can also speed it up by making your steps "detail" (hot key Ctrl + Shift + D). That turns the brushes green in the 2d window, and they will be invisible to the vis compile.

chorizo wrote:visdatasize:129160.....

.....50% complete. 0 hours 18 minutes 13 seconds remaining.

it stays here for hours.....

the only thing i have in my map are stairs with hand rail (multiple 50 sided bars...about 30)....an organ piano (around 20 50 sided pipes).....5 lights....and that's about all.....also texture

wot's the problem

The problem is that you have 30 50 sided brushes that's 1500 sides x 2 faces per side= 3000 faces on those stairs and another 2000 faces for the pipes.
You should make them detail as tltrude suggested. Then you can watch your visdata size drop as well.