raining through the roof..

Liberator · Post by **Liberator** » Thu Apr 05, 2007 3:42 pm

Hi Mates!

I've made rain succesfully...allmost!

I'ts raining through the roof

even though I have placed a rainbrush above the roof.

A screenshot :

Lib

Post by **jv_map** » Thu Apr 05, 2007 4:36 pm

What a crap roof

Maybe put the (bottom of the) rain brush a tad higher

Or caulk the ceiling

Liberator · Post by **Liberator** » Thu Apr 05, 2007 4:51 pm

LOL yeah crappy roof...Last time I use that wholesaler!!

Well, actually It did rain through the roof before I made that one above the roof. I understand that this rainbrush isn't that controlled with its drops...so the drops is falling "out of" the brushbox...?

So rain can't pass the caulk?

Post by **jv_map** » Fri Apr 06, 2007 10:48 am

No the caulk was a joke, more or less..

... yes try increasing the seperation between rain brushes / your building.

http://en.wikipedia.org/wiki/Caulk

Liberator · Post by **Liberator** » Tue Apr 10, 2007 3:00 pm

Hey

Now I just don?t get it

I have removed the upper rainbrush and the brushes on the side dont go above the roof....and it's still raining through the roof

Post by **jv_map** » Tue Apr 10, 2007 3:09 pm

Hmm maybe the brushes on the side are still too close to the building

Liberator · Post by **Liberator** » Wed Apr 11, 2007 1:10 pm

Its about 70-120 point away from the house...

tltrude · Post by **tltrude** » Wed Apr 11, 2007 5:34 pm

Delete and redo all your rain brushes.

Liberator · Post by **Liberator** » Sun Apr 15, 2007 9:14 pm

Hi Tom

I just redo the rainbrushes and it's stille raining through all roofs....and again, thats even though I haven't made brushed above the roofs...

-pretty strange, isn't it?

Lib

lizardkid · Post by **lizardkid** » Sun Apr 15, 2007 10:08 pm

do you need the rain clip above the roof? try removing it.

Liberator · Post by **Liberator** » Mon Apr 16, 2007 4:06 am

Hi Lizard..

I didnt made the rain clips above in the first place to see what happend, but it did still rain down through the roof...

So I didn't create the clip above second time to see what happend...

Lib

neillomax · Post by **neillomax** » Mon Apr 16, 2007 5:33 am

when you are in the map, check out how the rain slants as it's coming down. You need to move those brushes back a little bit. The one on the roof may be a little low. keep making adjustments til you get it.

Liberator · Post by **Liberator** » Mon Apr 16, 2007 11:12 pm

Hi neillomax,

The problem is that there is no brush...but it is still raining from...nothing

I've taken some screenshots:

Inside a building:

And outside the same building in MOHRadient:

neillomax · Post by **neillomax** » Tue Apr 17, 2007 12:20 am

That's a strange one. Try deleting ALL the rain brushes, recompile. See what happens.

You are going to have to get the remaining rain brushes FARTHER away from the house. Try that first.

tltrude · Post by **tltrude** » Tue Apr 17, 2007 12:26 pm

Are you making all the brushes into func_rain at the same time? Just do one brush at a time.

The game probably thinks all your brushes are one entity.

.Map :: MoHAA Mapping

raining through the roof..

raining through the roof..

Rain

rain